- Gearbox Oil Temperature Sensor £15.00
- Warning alarm buzzer £15.00
- Water Temperature Sensor £15.00
- Joystick Large Knob £8.00
- Exhaust Gas Temperature (EGT) K-Type thermocouple probe sensor £60.00
- Oil Temperature Sensor £15.00
- Outside Temperature Sensor £25.00
- Exhaust Manifold Pressure Sensor £55.00
- Zada Tech AFR (Air Fuel Ratio) Wideband Controller Functionality £20.00
- Differential Oil Temperature Sensor £15.00
- Transmission Oil Temperature Sensor £15.00
- Air Lift or Air Suspension Pressure Sensor £55.00
- Intake Air Temperature Sensor £35.00
- Combined Oil Fuel Pressure and Temperature Sensor M10 x 1mm Thread £55.00
- Boost (MAP) Pressure Sensor £55.00
- Zada Tech Wideband AFR (Air Fuel Ratio) Controller with Bosch ADV Sensor £210.00
- Interior Temperature Sensor £25.00
- Oil Pressure Sensor £55.00
- LED warning light £10.00
- Intercooler Air Temperature Sensor £35.00
- Throttle Position Sensor (TPS) £50.00
- Fuel Temperature Sensor £15.00
- Fuel Pressure Sensor £55.00
Mitsubishi Lancer Evolution CAN bus Multi Function Gauge Display for Double DIN Head Unit
Mitsubishi Lancer Evolution multi Function gauge display for double DIN head units with HDMI or AV video port.
Compatible with most aftermarket ECUs with CAN bus. Can be used on any double DIN head unit with an HDMI or AV/RCA analog output. There is also a possibility to pair it with any size external LCD screen.
The system is capable of holding the peak values, until the next time it is restarted. You can set peak values (by using the joystick), the needles will change to red when a peak value is reached.
As well as CAN bus we can incorporate our sensors within the system as extras. Please refer to the list on the right for the sensors that this gauge supports including the prices.
Graphical interface default values are set to the following, however we can add more readings if needed:
- Boost, Air Fuel Ratio (AFR), oil temperature, oil pressure, EGT, intake air temperature
The base kit includes:
- The controller box (HDMI or AV output)
- Joystick and knob.
- Dedicated CAN Bus ports.
Fully compatible with the following ECUs:
- Haltech
- Link ECU
- Emerald
