£1,200.00

Nissan Skyline GTR R32 / R33 / R34 Multi Function Gauge Display Carbon Fibre

Nissan Skyline GTR R32 / R33 / R34 multi function gauge display and carbon fibre pod.

This complete kit comes with the most popular sensors, you would ever need. Can be used on R32, R33 Dash but requires customisation of your dashboard. This is an exact copy of the R34 MFD pod. Can also be modified by the end user for installation in other chassis such as 240SX and RX7. The kit can also be supplied without the pod if needed for a reduced price, since it does work on almost any car.

On the first page you would get all the gauges apart from the volts. On the second page you would get the volts. The pages are switchable using the joystick supplied.

The system is capable of holding the peak values, until the next time it is restarted. You can set peak values (by using the joystick), the needles will change to red when a peak value is reached.

The kit includes the following:

- 7" IPS LCD and the controller box including the joystick. With reverse camera function

- Pod for the LCD screen

- Boost sensor (PSI or BAR)
High quality precise 3 wire boost pressure sensor
Pressure range (-30 In.Hg. to 44 PSI / -1 Bar to 3 Bar)
Comes complete with a hose connection boost pipe, filter and a t-piece
Made In JAPAN!

- RPM/Tacho hardware input
Tap into factory ECU wire

- Throttle Position Sensor (TPS) input
Tap into factory sensor wire

- Water temperature sensor (°C or °F)
High quality precise 2 wire sensor
Temperature range (0 - 150°C / 32 - 302°F)
Thread: 1/8" NPT

- Oil pressure sensor (PSI or BAR)
High quality precise 3 wire oil pressure sensor
Pressure range (0 - 150 PSI / 0 - 10 Bar)
Thread: 1/8" NPT
Comes with a connector and a 1.8 meter length cable

- Oil temperature sensor (°C or °F)
High quality precise 2 wire sensor
Temperature range (0 - 150°C / 32 - 302°F)
Thread: 1/8" NPT

- AFR controller and sensor
Never requires free-air calibration!
AFR Range: 8 to 16 AFR

- Volts input

The kit and sensors come with 1 year warranty.

This kit is also CAN Bus compatible. It can be customised to work with your aftermarket ECU with CAN Bus.

PRODUCT WIRING DIAGRAM